I applied on Lei Feng's website for about ten times, and finally I was lucky to win the lottery. I am still a little excited when I think of the news of winning the lottery. Well, let's go straight to the point:

As we all know, the data cable of almost all mobile phones (except the elderly phones) is used as the standard configuration of mobile phones. In the use of mobile phones, the larger use of the data cable is to charge mobile phones. As the most easily worn accessory of mobile phone accessories, the charging cable has changed from brand new to dilapidated more than once. I think there are many people who use chargers violently, such as holding the charging cable directly and pulling it from the socket, which is extremely easy to damage the data cable.

Now let's look back on this ZTE Green Juneng data cable. First, let's open the box with a fake one. I was so excited when I just received the trial product, so I opened it directly. So I try to recover to the original state.

After unpacking, it can be seen that the package is very simple. A data line does not need any additional packaging. The data line is embedded in the foam. The main body contains a data line, a magnetic suction head box, and a certificate of conformity.

In the last few detailed drawings, first of all, the wire is wrapped with nylon, which is much better than the plastic material of traditional data lines in terms of wear resistance and strength. I think that even users who have the habit of pulling the charging head directly through the charging line, such wire should be able to fully withstand. It is also equipped with winding tape, which is convenient for users to store, so it is considerate in terms of humanization.

The second is USB port. The first is silver aluminum alloy, which is very good for my taste and gives me a very delicate feeling. I think the process of online publicity is mainly reflected in this.

However, after careful observation, we also found that there were some shortcomings. We could see that there was obvious gel overflow. I think that the plastic was not injected, but cut directly. Therefore, the plastic process was not properly handled.

Then there is the magnetic suction module. The process of this part is relatively much better. The magnetic suction port uses gold color matching, so that the entire port does not lose the metal texture, but I still prefer all silver colors to show the beauty of simplicity.

I tried Apple's pin port data cable this time. As can be seen from the detail drawing of the magnetic suction port, it contains five corresponding pins, which is different from the four pin interface of micro USB commonly used by Android, so I think this is also the official reason why the two data cables cannot be mixed.

The attraction of the magnetic suction port is very strong. The two modules of the magnetic suction port can be completely and smoothly adsorbed by placing them about three or four centimeters away. There is no need to tangle in the direction of the socket, the front and the back, so this is also a humanistic side. After adsorption, it can be easily removed from the side to disconnect the adsorption, which makes it very convenient for us to disconnect our charging equipment. Moreover, it can avoid dropping the equipment due to an emergency that pulls the data cable in use. This method has been used in MacBook and Sony Z series mobile phones.

Finally, the use of the real machine. The iOS device in my hand is my iPad mini 2. After the interface is inserted into the iPad mini 2, the original round tablet protrudes one piece, which looks very ugly. So I will still choose to unplug the interface after the charging is completed, but after the protective sleeve is installed, the protruding feeling is significantly reduced, so I think if you use an iPad tablet, In addition, you happen to have a protective case similar to SmartCover, which can completely cover the interface module without affecting the aesthetics.

After the connection is successful, a blue dim light indicator light full of sense of technology will light up. The official said that 2.4A current charging is supported, because I have a 2.1A standard charger, so this item cannot be evaluated.

For data transmission, the speed bottleneck of data line transmission is usually not on the data line, but on the read-write performance of the hardware of the device itself, so the original configuration is sufficient for data transmission. So when it comes to data transmission with ZTE Green Juneng data line, I, like a former friend, have a negative attitude. When transmitting data, what we want is a one-time stable transmission, and we don't want to see any form of disconnection in the middle

Final summary:

The wire material is strong, and the interface metal texture is strong, but the plastic part is poor in workmanship, which has damaged the overall appearance impression of him.

Although the magnetic suction port is much thinner than the first generation, it is still too prominent when installed on the equipment, affecting the appearance.

The ability to add indicators on the data line is very good, and should also be an example for other similar products.

There are some highlights on the whole, but they are a little flashy